Ice Fishing Auger Blade Sharpening
Ice Fishing Auger Blade Sharpening
How to Sharpen Ice Fishing Auger Blades
Sharpening an ice fishing auger blade is an important part of every ice fisherman's maintenance routine. It is an essential part of being prepared, as having a dull blade can make it difficult to drill holes in the ice. Fortunately, sharpening an auger blade is relatively easy and does not require many tools. Here are the steps for sharpening an ice fishing auger blade.
Step 1: Removing the Old Blade
The first step to sharpening an auger blade is to remove the old blade from the auger. To do this, use a pair of pliers to loosen the nuts and bolts that secure the blade to the auger. Once the blade is free, use a cloth to wipe away any dirt or debris that may be present on the blade before beginning the sharpening process.
Step 2: Sharpening the Blade
Once the blade is free from the auger, it is time to sharpen it. For this, you will need a sharpening stone or a file. If you are using a sharpening stone, wet it with some water and then rub it against the blade in a circular motion. This will sharpen the blade and make it easier to cut through the ice. Alternatively, you can use a file to sharpen the blade. To do this, hold the file at a 45-degree angle and draw it along the blade in a back-and-forth motion. This will also sharpen the blade.
Step 3: Reinstalling the Blade
Once the blade is sharpened, it is time to reinstall it on the auger. To do this, use a pair of pliers to secure the nuts and bolts that hold the blade in place. Make sure the blade is securely fastened before proceeding. If the blade is not securely fastened, it can cause damage to the auger or make it difficult to drill holes in the ice.
Step 4: Checking the Blade
Once the blade is reinstalled, it is important to check the sharpness of the blade. This can be done by running a finger along the blade. If the blade is sharp, it should feel smooth. If the blade feels rough or jagged, it is likely not sharp enough and should be sharpened again. It is important to make sure the blade is sharp before using the auger, as a dull blade can cause damage to the auger or make it difficult to drill holes in the ice.
Conclusion
Sharpening an ice fishing auger blade is an important part of every ice fisherman's maintenance routine. It is an essential part of being prepared for a successful ice fishing trip. Fortunately, sharpening an auger blade is relatively easy and does not require many tools. By following the steps outlined above, you can sharpen an auger blade and make sure it is sharp and ready to cut through the ice.
