How To Sharpen Ice Fishing Auger Blades
How To Sharpen Ice Fishing Auger Blades
Introduction
Ice fishing can be a great way to spend some time out on the lake or river. You can enjoy the peacefulness of the surroundings, the sound of the ice cracking, and the excitement of catching a fish. But before you can start fishing, you need to make sure your ice auger is in good working order. One of the most important things you can do is sharpen the blades. Sharp blades make it easier to cut through the ice and the fish won’t be able to get away as easily. In this article, we’ll show you how to sharpen the blades on your ice auger.
Step 1: Prepare the Auger and Blades
The first step is to prepare the auger and blades. Start by removing the blades from the auger. You may need to use a wrench to loosen the bolts that hold the blades in place. Once the blades are removed, you’ll need to clean them. Use a wire brush to remove any dirt or debris from the blades. This will help to make sure that the sharpening process is as effective as possible.
Step 2: Sharpen the Blades
Once the blades are clean, you can start the sharpening process. You’ll need to use a file or sharpening stone to sharpen the blades. Start by running the file or stone along the edge of the blade. Make sure to keep the file or stone at a consistent angle and make sure to sharpen both sides of the blade. After you’ve finished sharpening the blades, you can use a cloth to wipe away any debris that may have been created in the process.
Step 3: Test the Blades
Once the blades have been sharpened, you can test them. You can do this by running your finger along the edge of the blade. If you can feel a sharp edge, then the blades have been successfully sharpened. If not, then you’ll need to repeat the process until you get the desired result.
Step 4: Reattach the Blades
Once the blades have been sharpened, you can reattach them to the auger. Make sure to use the proper tools to do this. Use a wrench to securely tighten the bolts that hold the blades in place. Once the blades are in place, you can test them by running the auger through a block of ice. If the blades cut through the ice easily, then you’ve successfully sharpened the blades.
Conclusion
Sharpening the blades on your ice auger can be a tricky process, but with the right tools and a bit of patience, you can get it done. Start by preparing the auger and blades and then use a file or stone to sharpen the blades. Test the sharpness of the blades and then reattach them to the auger. With a sharp auger, you’ll be ready to start fishing in no time.
